Skip to content
STP · ETP · WTP · RO — Pune, Maharashtra

Operation and maintenance

STP and ETP operation and maintenance.

A plant is only as good as the way it is run. We provide trained operators, scheduled AMC visits, testing support, spares and repairs, for plants we built and plants we took over.

Models
Full O&M, AMC visits, on-call
Covers
STP, ETP, WTP, RO, softeners
Area
Pune and nearby
Engineer inspecting a water treatment plant

Overview

Keep the plant doing its job.

Many STPs and ETPs in Pune were built well but are run poorly: blowers off to save power, sludge not removed, filters never backwashed. The result is smell, failed tests and costly breakdowns. Regular, informed operation prevents most of this.

Under a full O&M contract our operator runs the plant daily, keeps log sheets, handles chemicals and sludge, and escalates faults. Under an AMC, our engineer visits on a fixed schedule, checks equipment and process, trains your staff and reports to management.

You probably need this if

  • Society or facility without trained plant staff
  • Plant failing tests or causing complaints
  • Consent renewal needs better records
  • You want predictable maintenance costs

How it works

The treatment step by step.

  1. 1

    Plant audit

    Condition of equipment, process performance and records.

  2. 2

    Restoration

    Repairs, cleaning and process correction to bring the plant back to normal.

  3. 3

    Contract start

    Operator deployment or AMC schedule, checklists and reporting format agreed.

  4. 4

    Routine operation

    Daily checks, sludge routine, backwash, dosing and log sheets.

  5. 5

    Reporting

    Monthly report with run hours, consumables, faults and lab results.

Service options

Choose the level of support.

  • Full operation

    Our operator on site daily or in shifts, with supervision and backup.

  • AMC visits

    Weekly, fortnightly or monthly engineer visits with preventive maintenance.

  • Breakdown support

    On-call repairs, pump and blower overhauls, diffuser and media replacement.

  • Testing support

    Sampling and coordination with laboratories for periodic analysis.

  • Spares and consumables

    Diffusers, media, filter cartridges, membranes, chemicals and salt.

  • Compliance records

    Log books and reports ready for audits and consent renewal.

What you get

Built to run day after day.

  • Fewer failures

    Preventive maintenance catches problems before they stop the plant.

  • Controlled power use

    Blowers and pumps run for what the load needs, not more.

  • Transparent reporting

    Committees and plant heads see exactly what was done.

From enquiry to handover

One team, start to finish.

We design, fabricate, install and maintain the plant, so there is one point of contact for performance.

  1. 01

    Site survey

    We visit, test the water or wastewater, measure the space and note power, access and discharge points.

  2. 02

    Process design

    Flow and load calculations, treatment train, layout drawing and a clear scope of supply.

  3. 03

    Fabrication

    Tanks, skids, panels and piping built and checked in our Pune workshop before dispatch.

  4. 04

    Install and commission

    Erection, wiring, seeding or start-up, trial runs and operator training at your site.

  5. 05

    Operate and maintain

    Optional operation, AMC visits, spares and performance reports so the plant keeps working.

Faster, more accurate quotes

What to share with your enquiry.

A few details let us size the plant properly the first time. If you do not have them yet, we can measure or test on site.

  • Plant type and capacity
  • Who built it and when
  • Current problems
  • Preferred support model

Questions we hear

Questions about operation and maintenances.

Do you maintain plants built by other companies?

Yes. We start with an audit and a restoration list, then take over operation or maintenance.

What is included in an STP AMC?

Scheduled visits, inspection and servicing of blowers, pumps and panels, process checks, filter and diffuser maintenance, and a report after each visit. Spares and chemicals are included or charged separately as agreed.

How often should an STP be serviced?

Daily checks by an operator, and an engineer visit at least monthly for most building STPs. Larger or industrial plants need more frequent attention.

Can you supply only an operator?

Yes, with supervision and backup from our engineers.

Do you cover RO plants and softeners too?

Yes. We service RO plants, softeners, filters and other water treatment equipment.

Talk to an engineer

Planning a operation and maintenance?

Share your flow, water quality and site details. An engineer will reply with the next step, usually a site visit or a sizing call.