Effluent treatment plant (ETP)
Effluent treatment designed from your lab report.
Industrial wastewater is different in every factory. We design ETPs from your effluent analysis and production pattern, then build and commission them so you meet your consent conditions and reuse as much water as possible.
- Stages
- Primary, physico-chemical, biological, tertiary
- Options
- Batch or continuous, skid or civil
- Goal
- Compliance and water reuse

Overview
What an ETP actually does.
An effluent treatment plant takes process wastewater from manufacturing, removes oil, suspended solids, colour, organic load and toxic substances, and produces water that can be safely discharged or reused. The solids removed leave as sludge, which is dewatered and sent for disposal as your waste authorisation requires.
There is no standard ETP. A dairy needs fat removal and biology; a paint shop needs chemical treatment and good settling; a pharma unit may need several streams segregated. That is why we always begin with a sample analysis and a look at how and when effluent is produced.
You probably need this if
- Your factory generates process wastewater
- You are applying for or renewing consent to operate
- Current ETP misses its outlet limits
- You want to reuse treated effluent and cut fresh water use
How it works
The treatment step by step.
- 1
Collection and screening
Screens and an oil and grease trap remove floating matter and free oil.
- 2
Equalisation
A mixed tank evens out flow and strength between batches and shifts.
- 3
Neutralisation
Acid or alkali dosing brings pH into the working range, controlled by a pH meter.
- 4
Coagulation and flocculation
Alum, ferric or PAC with polyelectrolyte makes fine solids clump together.
- 5
Primary settling or DAF
A tube settler, clarifier or dissolved air flotation unit removes the flocs.
- 6
Biological treatment
MBBR or activated sludge removes dissolved organic load where needed.
- 7
Tertiary treatment
Sand and carbon filters, and RO or UF where water is reused.
- 8
Sludge dewatering
Filter press, screw press or drying beds turn sludge into a handleable cake.

Technology options
Choose the process that fits your load.
We confirm the process with a jar test or pilot where the effluent is unusual.
Physico-chemical
pH correction, coagulation, flocculation and settling for metals, paint and suspended solids.
Biological
MBBR, activated sludge or anaerobic stages for food, dairy and organic effluents.
Membranes
UF and RO for reuse; RO reject goes to evaporation in zero liquid discharge schemes.
DAF
Dissolved air flotation for oily, fatty and light solids that will not settle.
Advanced oxidation
Ozone or Fenton-type oxidation for colour and hard COD, where tests show it is needed.
Batch ETP
Simple batch tanks for small daily volumes from paint shops, labs and plating lines.
Where it is used
- Engineering and automobile
- Paint shops
- Dairy and food
- Pharma and chemicals
- Textile and dyeing
- Paper
- Hospitals and labs
- Slaughterhouses
What you get
Built to run day after day.
Designed from data
COD, BOD, TSS, oil, pH and TDS from your samples set the design, not a catalogue.
Reuse first
Where the numbers work, we design for reuse in utilities and gardening.
Controlled dosing
Dosing pumps and pH control so chemical use stays predictable.
Practical layout
Gravity flow where possible, accessible pumps and easy sludge removal.
Compliance support
Log books, test records and drawings for your consent file.
Corrosion-proof build
FRP, PP or lined tanks where the effluent attacks steel.
From enquiry to handover
One team, start to finish.
We design, fabricate, install and maintain the plant, so there is one point of contact for performance.
- 01
Site survey
We visit, test the water or wastewater, measure the space and note power, access and discharge points.
- 02
Process design
Flow and load calculations, treatment train, layout drawing and a clear scope of supply.
- 03
Fabrication
Tanks, skids, panels and piping built and checked in our Pune workshop before dispatch.
- 04
Install and commission
Erection, wiring, seeding or start-up, trial runs and operator training at your site.
- 05
Operate and maintain
Optional operation, AMC visits, spares and performance reports so the plant keeps working.
Faster, more accurate quotes
What to share with your enquiry.
A few details let us size the plant properly the first time. If you do not have them yet, we can measure or test on site.
- Effluent analysis report (pH, COD, BOD, TSS, oil, TDS)
- Daily volume and number of shifts
- Products manufactured and chemicals used
- Outlet limits in your consent
- Space and existing tanks
Questions we hear
Questions about effluent treatment plants.
What is the difference between an STP and an ETP?
An STP treats domestic sewage from toilets, kitchens and bathrooms using biological treatment. An ETP treats industrial process effluent, which can contain chemicals, oils, metals or colour and usually needs chemical treatment as well. Many factories need both.
Do you need a lab report before quoting?
For a firm quote, yes. For budgeting we can work from your process description and volume, then confirm the design once a sample is analysed.
Can treated effluent be reused?
Often. After tertiary treatment it can go to gardening, floor washing or cooling towers. For boiler or process use, an RO stage is usually added.
What happens to ETP sludge?
It is thickened and dewatered, then disposed of through the route your hazardous or non-hazardous waste authorisation allows, typically an authorised treatment, storage and disposal facility.
Can you take over an existing ETP that is not working?
Yes. We audit the plant, run jar tests, correct dosing and fix mechanical faults, then offer operation and maintenance if you need it.
Related systems
Often specified together.
Talk to an engineer
Planning a effluent treatment plant?
Share your flow, water quality and site details. An engineer will reply with the next step, usually a site visit or a sizing call.